Tel/Whatsapp:+86-13013179882 Email:futao@orinkoplastic.com
| Quantity: | |
|---|---|
H -series
orinko
Polylactic acid (PLA) is a novel bio-based and renewable biodegradable material, which is made from starch materials proposed by renewable plant resources (such as maize and cassava). Starch raw materials were saccharized to get glucose, and then high purity lactic acid was made by fermentation of glucose and certain strains, and then POLylactic acid with a certain molecular weight was synthesized by chemical synthesis. It has good biodegradability. After use, it can be completely degraded by microorganisms in nature under specific conditions, and eventually generate carbon dioxide and water. It does not pollute the environment, which is very beneficial to the protection of the environment and is recognized as environmentally friendly material.
plastic materials pla resin from plant accept OEM & ODM
Modifiable,Extrusion molding,Blister molding,Thermoforming
For straws, blister trays, food containers, cards, fiber etc.
With high molecular weight and melt strength, high melting point and crystallinity, it can be used to produce heat-resistant polylactic acid extrusion, blister products after proper modification.
Melt spinning
For Long fiber, short fiber, Meltblown non-woven fabric etc.
With fast crystallization characteristics, can be quickly crystallized under stretch orientation conditions
| Item | Unit | Test Method | HT101 | HT102 | HT103 | HT201 | HT202 | HT203 | HT301 | HT302 | HT303 |
| Moldinging Method | Modifiable,Extrusion molding,Blister molding,Thermoforming | Modifiable,Extrusion molding,Blister molding,Thermoforming | Modifiable,Extrusion molding,Blister molding,Thermoforming | Modifiable,Injection molding | Modifiable,Injection molding | Modifiable,Injection molding | FDM 3D print | Extrusion molding | FDM 3D print | ||
| Density | g/cm3 | GB/T1033.1-2008 | 1.24±0.05 | 1.24±0.05 | 1.24±0.05 | 1.24±0.05 | 1.24±0.05 | 1.24±0.05 | 1.24±0.05 | 1.24±0.05 | 1.24±0.05 |
| Melt Flow Rate | g/10min 190℃/2.16kg | GB/T3682.1-2018 | 2-9 | 2-9 | 2-9 | 10-25 | 10-25 | 10-25 | 2-6 | 2-6 | 2-6 |
| Melting temperature | ℃ | GB/T19466.3-2004 | ≥175 | 160-174 | <160 | ≥175 | 160-174 | <160 | 175 | 160-174 | <150 |
| Glass transition temperature | ℃ | GB/T19466.2-2004 | 58-62 | 58-62 | 58-62 | 58-62 | 58-62 | 58-62 | 58-62 | 58-62 | 58-62 |
| Tensile strength | MPa | GB/T1040.1-2018 | ≥55 | ≥50 | ≥50 | ≥45 | >45 | ≥45 | ≥55 | ≥50 | ≥45 |
| Elongation at Break | % | GB/T1040.1-2018 | <5 | <5 | <5 | <5 | <5 | <5 | <5 | <5 | <5 |
| Izod Notched Impact Strength | kJ/m2 4mm,23℃ | GB/T1043.1-2008 | <5 | <5 | <5 | <5 | <5 | <5 | <5 | <5 | <5 |
| Application | Heat-resistant straws, blister trays, food containers, cards, heat-resistant products, etc. | Blister trays, food containers, cards, etc. | Low heat-resistant blister products, transparent films, blister trays, food containers, cards, etc. | Disposable tableware, food containers, toys, other injection products, etc. | Disposable tableware, food containers, toys, other injection products, etc. | Disposable transparent tableware, food containers, toys, other injection products, etc. | 3D printing. | Straws. | 3D printing. | ||
| Feature | With high molecular weight and melt strength, high melting point and crystallinity, it can be used to produce heat-resistant polylactic acid extrusion, blister products, or heat-resistant products after proper modification. | With high molecular weight and melt strength, it can meet the corresponding process requirements. | With high molecular weight and melt strength, low crystallinity, can be used to produce low-resistance, high transparency polylactic acid film, blister products. | With good fluidity, high melting point and crystallinity, it can be used to produce heat-resistant polylactic acid injection products, or heat-resistant injection molding and blister products after proper modification. | With good fluidity, moderate melting point and crystallinity, it can be used to produce heat-resistant polylactic acid injection molding products. | With good fluidity, low melting point and slow crystallinity, it can be used to produce low-resistance, high transparency polylactic acid injection molding products. | With high crystallization rate and melt stability, it meets the requirements of FDM 3D printing molding process, and with appropriate heating process, it can produce heat-resistant 3D printing products | With appropriate crystallization rate and melt strength, which can meet the requirements of the molding process as a straw, and can also be blended with other types of biodegradable plastics to produce modified straws. | Amorphous polylactic acid resin, suitable for 3D printing molding process, with high bond strength between layers. |
· The values listed are typical and should not be interpreted as specifications.
· For availability and more model parameters, please contact account manager.
8 Product Application：
Disposable Tableware、Film Product、Packing Product、Textile Product、Electronics Product、Car Industry、3D Printing、Medical Filed
JJ 、BPI、OK Compost Home、Ok Compost Industrial
ISO9001、OHSAS18001、ISO45001、ISO17025、ISO14001
ORINKO since2008， listed in 2021， is a national high-tech enterprise which specialize in the research、 development、 production and sales of modified materials. It provides a full range of modified polyethylene, polyolefin, polyester, and polyamide products and also provide overall solutions of materials to customers.
the company is headquartered in Hefei, and currently has two production bases in Hefei and Chongqing, it builds a domestic first-class intelligent production plant for modified materials , and achieved an annual output and sales volume of over 1000,000 tons.
1.Are you a trading company or a manufacturer?
-We are a high-tech enterprise specializing in R&D, production and sales of polymer compounds, and dedicated to developing high performance Polymer Materials.Including BioPlastics, Polyolefins, Polystyrenes, Polyethylene, Engineering Plastics etc.
2.What's your biodegradeble resin range?
-We have a series of modified biodegradable materials.They are used in garbage bags, shopping bags, disposable tableware, 3D printing and electrical product casings.
3.I want some special purpose biodegradable raw materials,can you help me?
-Yes,that's our honor,we have a R&D team of more than 350 people, and more than 100 patents,created more than 300 kinds of polymer modified materials its products to our customers that perform in their own markets and meet product performance criteria at reasonable cost.
We can enhance the biodegradable resins of heat resistance, hardness, strength of finished products for you.
If our existing biodegradable resin meets your needs, it will take about 3-5 days to send out the sample.
If we need to reformulate the formula according to your needs,it will take about 5-10 days to send out the sample.
Afte you receive the samples and meet your needs.We will ships in 5-10 days.
You can find the packaging above picture.
6.What is your payment term?
-T/T,Western Union,MoneyGram,and Paypal.This is negotiable.
7.What is the shipping method?
-It could be shipped by sea,by air or by express(EMS,UPS,DHL,TNT,FEDEX and ect).
Please confirm with us before placing orders.
Due to the properties of biodegradable resin, it is recommended to use a constant temperature container.
Polylactic acid (PLA) is a novel bio-based and renewable biodegradable material, which is made from starch materials proposed by renewable plant resources (such as maize and cassava). Starch raw materials were saccharized to get glucose, and then high purity lactic acid was made by fermentation of glucose and certain strains, and then POLylactic acid with a certain molecular weight was synthesized by chemical synthesis. It has good biodegradability. After use, it can be completely degraded by microorganisms in nature under specific conditions, and eventually generate carbon dioxide and water. It does not pollute the environment, which is very beneficial to the protection of the environment and is recognized as environmentally friendly material.
plastic materials pla resin from plant accept OEM & ODM
Modifiable,Extrusion molding,Blister molding,Thermoforming
For straws, blister trays, food containers, cards, fiber etc.
With high molecular weight and melt strength, high melting point and crystallinity, it can be used to produce heat-resistant polylactic acid extrusion, blister products after proper modification.
Melt spinning
For Long fiber, short fiber, Meltblown non-woven fabric etc.
With fast crystallization characteristics, can be quickly crystallized under stretch orientation conditions
| Item | Unit | Test Method | HT101 | HT102 | HT103 | HT201 | HT202 | HT203 | HT301 | HT302 | HT303 |
| Moldinging Method | Modifiable,Extrusion molding,Blister molding,Thermoforming | Modifiable,Extrusion molding,Blister molding,Thermoforming | Modifiable,Extrusion molding,Blister molding,Thermoforming | Modifiable,Injection molding | Modifiable,Injection molding | Modifiable,Injection molding | FDM 3D print | Extrusion molding | FDM 3D print | ||
| Density | g/cm3 | GB/T1033.1-2008 | 1.24±0.05 | 1.24±0.05 | 1.24±0.05 | 1.24±0.05 | 1.24±0.05 | 1.24±0.05 | 1.24±0.05 | 1.24±0.05 | 1.24±0.05 |
| Melt Flow Rate | g/10min 190℃/2.16kg | GB/T3682.1-2018 | 2-9 | 2-9 | 2-9 | 10-25 | 10-25 | 10-25 | 2-6 | 2-6 | 2-6 |
| Melting temperature | ℃ | GB/T19466.3-2004 | ≥175 | 160-174 | <160 | ≥175 | 160-174 | <160 | 175 | 160-174 | <150 |
| Glass transition temperature | ℃ | GB/T19466.2-2004 | 58-62 | 58-62 | 58-62 | 58-62 | 58-62 | 58-62 | 58-62 | 58-62 | 58-62 |
| Tensile strength | MPa | GB/T1040.1-2018 | ≥55 | ≥50 | ≥50 | ≥45 | >45 | ≥45 | ≥55 | ≥50 | ≥45 |
| Elongation at Break | % | GB/T1040.1-2018 | <5 | <5 | <5 | <5 | <5 | <5 | <5 | <5 | <5 |
| Izod Notched Impact Strength | kJ/m2 4mm,23℃ | GB/T1043.1-2008 | <5 | <5 | <5 | <5 | <5 | <5 | <5 | <5 | <5 |
| Application | Heat-resistant straws, blister trays, food containers, cards, heat-resistant products, etc. | Blister trays, food containers, cards, etc. | Low heat-resistant blister products, transparent films, blister trays, food containers, cards, etc. | Disposable tableware, food containers, toys, other injection products, etc. | Disposable tableware, food containers, toys, other injection products, etc. | Disposable transparent tableware, food containers, toys, other injection products, etc. | 3D printing. | Straws. | 3D printing. | ||
| Feature | With high molecular weight and melt strength, high melting point and crystallinity, it can be used to produce heat-resistant polylactic acid extrusion, blister products, or heat-resistant products after proper modification. | With high molecular weight and melt strength, it can meet the corresponding process requirements. | With high molecular weight and melt strength, low crystallinity, can be used to produce low-resistance, high transparency polylactic acid film, blister products. | With good fluidity, high melting point and crystallinity, it can be used to produce heat-resistant polylactic acid injection products, or heat-resistant injection molding and blister products after proper modification. | With good fluidity, moderate melting point and crystallinity, it can be used to produce heat-resistant polylactic acid injection molding products. | With good fluidity, low melting point and slow crystallinity, it can be used to produce low-resistance, high transparency polylactic acid injection molding products. | With high crystallization rate and melt stability, it meets the requirements of FDM 3D printing molding process, and with appropriate heating process, it can produce heat-resistant 3D printing products | With appropriate crystallization rate and melt strength, which can meet the requirements of the molding process as a straw, and can also be blended with other types of biodegradable plastics to produce modified straws. | Amorphous polylactic acid resin, suitable for 3D printing molding process, with high bond strength between layers. |
· The values listed are typical and should not be interpreted as specifications.
· For availability and more model parameters, please contact account manager.
8 Product Application：
Disposable Tableware、Film Product、Packing Product、Textile Product、Electronics Product、Car Industry、3D Printing、Medical Filed
JJ 、BPI、OK Compost Home、Ok Compost Industrial
ISO9001、OHSAS18001、ISO45001、ISO17025、ISO14001
ORINKO since2008， listed in 2021， is a national high-tech enterprise which specialize in the research、 development、 production and sales of modified materials. It provides a full range of modified polyethylene, polyolefin, polyester, and polyamide products and also provide overall solutions of materials to customers.
the company is headquartered in Hefei, and currently has two production bases in Hefei and Chongqing, it builds a domestic first-class intelligent production plant for modified materials , and achieved an annual output and sales volume of over 1000,000 tons.
1.Are you a trading company or a manufacturer?
-We are a high-tech enterprise specializing in R&D, production and sales of polymer compounds, and dedicated to developing high performance Polymer Materials.Including BioPlastics, Polyolefins, Polystyrenes, Polyethylene, Engineering Plastics etc.
2.What's your biodegradeble resin range?
-We have a series of modified biodegradable materials.They are used in garbage bags, shopping bags, disposable tableware, 3D printing and electrical product casings.
3.I want some special purpose biodegradable raw materials,can you help me?
-Yes,that's our honor,we have a R&D team of more than 350 people, and more than 100 patents,created more than 300 kinds of polymer modified materials its products to our customers that perform in their own markets and meet product performance criteria at reasonable cost.
We can enhance the biodegradable resins of heat resistance, hardness, strength of finished products for you.
If our existing biodegradable resin meets your needs, it will take about 3-5 days to send out the sample.
If we need to reformulate the formula according to your needs,it will take about 5-10 days to send out the sample.
Afte you receive the samples and meet your needs.We will ships in 5-10 days.
You can find the packaging above picture.
6.What is your payment term?
-T/T,Western Union,MoneyGram,and Paypal.This is negotiable.
7.What is the shipping method?
-It could be shipped by sea,by air or by express(EMS,UPS,DHL,TNT,FEDEX and ect).
Please confirm with us before placing orders.
Due to the properties of biodegradable resin, it is recommended to use a constant temperature container.
